Control CNC Services Ltd

07469 718828
01299 821117

07469 718828 or 01299 821117

  20 YEARS EXPERIENCE

  SIEMENS BLACKBELT TRAINED

  HIGHLY COMPETITIVE RATES

  20 YEARS EXPERIENCE
  SIEMENS BLACKBELT TRAINED
  HIGHLY COMPETITIVE RATES

Noisy Spindle and Poor Surface Finish

CNC Machine Maintenance Service

Posted on 8th April 2020

A noisy spindle and poor surface finish on his Hardinge lathe was the complaint from this customer. We carried out a site visit to diagnose, after a few checks and tests we concluded that the spindle bearings had started to fail.

Unfortunately through excessive working, the grease had dried out, it was only a matter of time until the spindle seized completely potentially causing more damage.

Hurco VMX42

Hurco VMX42

Hurco VMX42

Hurco VMX42

We removed the spindle and had it professionally rebuilt, run and tested it before returning to recommission it.

All this was done over 3 days to minimise disruption to our customer.

Please contact Control CNC using the green button at the top of this page if you think we would be able to help with your machine, we cover the whole of the UK and Ireland. We can help you book a service, quote you for a repair or help you purchase the best quality parts for you business.

Did you like our article on our CNC machine prevention maintenance service? Then share with your friends


Siemens control and drive specialist
cnc diagnosis and repairs
Worcestershire CNC repairs
CNC prevention breakdown
fully inclusive cnc service

Website Design by RLM Design - © Control CNC Services Ltd.
10 Evergreen Way, Stourport On Severn, Worcestershire. DY13 9GH. All rights reserved.

Sitemap

Follow Us